irrigation - Flash Flood

Rain Bird Electric Valves

Flash Flood — Mon, 17 Jul 2023 17:04:50 +0000

Features (HV Series)

Patented, eccentric, balanced pressure, Buna-N diaphragm with self-cleaning 90-mesh (200 microns) pilot water filter and captured stainless steel spring – Eccentric design provides smoother closing, less water hammer

Only four durable, captured multi-drive bonnet screws that come out with half the number of turns for fast and easy servicing – at least twice as fast as the competition

Glass-filled polypropylene body for strength (slip by slip model bodies are PVC)

All popular model configurations available

Compact design, 2.54″ spin radius for tight installations

Reverse flow, normally closed design

External bleed to manually flush the system of dirt and debris during installation and system start-up

Internal bleed for spray-free manual operation

Operates in low-flow and Landscape Drip applications when a 200 mesh filter is installed upstream

Specs (HV Series)

Pressure: 15 to 150 PSI (1,0 to 10,3 bar)

Flow: 0.2 to 30 GPM (0,05 to 6,82 m3/h; 0,01 to 1,89 l/s); for flows below 3 GPM (0,68 m3/h; 0,19 l/s) or any Landscape Drip application, use a 200 mesh filter installed upstream

Operating Temperatures: Water temperature up to 110° F (43° C); ambient temperature up to 125° F (52° C)

Inrush current: 0.290A at 50/60 Hz

Holding current: 0.091A at 50/60 Hz

Solenoid Coil resistance: 70-85 Ohms (40° F – 110° F)

24 VAC 50/60 Hz (cycles/sec.) solenoid

Features (DV Series)

Double-filtered (diaphragm and solenoid) pilot-flow design for maximum reliability and grit resistance

Buna-N, balanced pressure diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring

Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter

Unique, easy-to-turn pressure assisted flow control mechanism (DVF models only)

External bleed to manually flush the system of dirt and debris during installation and system start-up

Internal bleed for spray-free manual operation

Accepts Rain Bird TBOS latching solenoid for use with most battery-operated controllers

Operates in low-flow and Landscape Drip applications when a 200 mesh filter is installed upstream

*Not recommended for use with two-wire control systems

Specs (DV Series)

Pressure: 15 to 150 psi (1,0 to 10,4 bar)

075-DV Non-Flow Control Model: 0.2 to 22 GPM (0,05 to 5,0 m³/h; 0,01 to 1,39 l/s). For flows below 3 GPM (0,68 m³/h; 0,19 l/s) or any Landscape Drip application, use a 200 mesh filter installed upstream

100-DV Non-Flow Control Model: 0.2 to 40 gpm (0,05 to 9.085 m³/h; 0,01 to 2,52 l/s). For flows below 3 gpm (0,68 m³/h; 0,19 l/s) or any Landscape Drip application, use a 200 mesh filter installed upstream

100-DVF Flow Control Model: 0.2 to 40 gpm (0,05 to 9.085 m³/h; 0,01 to 2,52 l/s); For flows below 3 gpm (0,68 m³/h; 0,19 l/s) or any Landscape Drip application, use a 200 mesh filter installed upstream

Water temperature: Up to 110°F (43°C)

Ambient air temperature: Up to 125°F (52°C)

Solenoid coil resistance: 38 Ohms

24 VAC 50/60Hz (cycles per second) solenoid power requirement: 0.450A inrush current, 0.25A holding current

The post Rain Bird Electric Valves first appeared on Flash Flood.

Rain Bird 2045-08 Maxi PAW

Flash Flood — Mon, 17 Jul 2023 16:50:50 +0000

Features

Proven impact drive with straight-through flow for superior performance in dirty water

Five standard trajectory and two low angle (LA) color-coded nozzles for matched precipitation and in a wide range of applications

360° full-circle OR arc adjustable from 20° to 340°

Side and combination ½” or ¾” bottom inlet for design flexibility (Maxi-Paw)

3 year warranty

Specs

Precipitation Rate: 0.28 to 1.21 inches per hour (7 to 31 mm/h)

Radius: 22 to 45 feet (6,7 to 13,7 m)

Radius with Radius Reduction Screw: 18 ft (5,4 m)

Pressure: 25 to 60 psi (1,7 to 4,1 Bars)

Flow: 1.5 to 8.4 GPM (0,34 to 1,91 m3/h; 0,9 to 0,53 l/s)

Combination 1/2″ (15/21) or 3/4″ (20/27) FPT bottom inlet 1/2″ (15/21) FPT side inlet

Nozzles: 06-red; 07-black; 08-blue; 10-yellow; 12-beige

Low angle (LA) nozzles: 07 LA-black; 10 LA-yellow

Nozzle outlet trajectory is 23° for 06, 07, 08, 10, and 12 nozzles

LA nozzle outlet trajectory is 11°

Available Nozzles:

Standard trajectory 06, 07, 08, 10, 12

Low Angle 07LA, 10LA

Dimensions

Overall height: 9 3/10″ (23,6 cm)

Pop-up height: 3″ (7,6 cm)

Exposed surface diameter: 5″ (12,7 cm)

The post Rain Bird 2045-08 Maxi PAW first appeared on Flash Flood.

Rain Bird 3504 Rotor 4″

Flash Flood — Mon, 17 Jul 2023 16:47:03 +0000

Features

Rain Curtain nozzles deliver even distribution over the entire radius including large wind resistant droplets and gentle close-in watering resulting in greener turf using less water

Oversized wiper seal prevents leaks and protects internals from debris

Arc adjustment through the top of the rotor requiring only a flat-blade screwdriver

Specs

Precipitation rate: 0.37 to 0.83 inches per hour (9 to 21 mm/h)

Radius: 15 to 35 feet (4.6 to 10.7 m)

Radius may be reduced up to 25% with radius reduction screw

Pressure: 25 to 55 psi (1.7 to 3.8 bar)

Flow rate: 0.54 to 4.6 gpm (2.0 to 17.4 l/m)

SAM Seal-A-Matic check valve holds up to 7 ft (2.1 m) of elevation change

1⁄2″ NPT female bottom threaded inlet

Reversing full- and part-circle adjustment 40° – 360°

Nozzle trajectory of 25°

The post Rain Bird 3504 Rotor 4″ first appeared on Flash Flood.

Rain bird 5004 Rotor 4″

Flash Flood — Mon, 17 Jul 2023 16:42:31 +0000

Features

Professional grade rotor offers rugged durability and performance
26 – 38 ft. watering distance with pre-installed 3.0 GPM nozzle
Up to 50 ft. watering distance by changing nozzles (supplied)
4 in. pop-up clears taller grass
3/4 in. female threaded bottom inlet
Simple arc and radius adjustment from the top requiring only a flat-bladed screwdriver
Water-lubricated gear-drive design for durable, reliable operation
Dual-action, positive stop wiper seal protects internals from debris and, together with a heavy duty stainless steel spring, assures positive pop-up and retraction for water savings
Gentle close-in watering eliminates dry spots around the rotor, also avoiding seed wash-out
Includes 12 extra nozzles: (3 low trajectory 1.0 to 3.0 GPM and 8 Rain Curtain nozzles 1.5 to 8.0 GPM)
Durable rubber cover

Specs

Operating Range

Precipitation rate: 0.20 to 1.01 inches per hour (5 to 26 mm/h)
Radius: 25 to 50 feet (7,6 to 15,2 m)
Radius may be reduced up to 25% with radius reduction screw
Pressure: 25-65 psi (1,7 to 4,5 bar)
Flow Rate: 0.73 to 9.63 gpm (4,2 to 36,6 l/m)

Specifications

3/4″ (20/27) NPT female bottom threaded inlet
Reversing full and part circle adjustment 40° – 360°

Dimensions

Pop-up height: 4″ (10,2 cm)
Overall body height: 7 3/8″ (18, 5 cm)
Exposed surface diameter: 1 5/8″ (4,1 cm)

Note: Pop-up height measured from the cover to the nozzle. Overall body height is measured popped down

The post Rain bird 5004 Rotor 4″ first appeared on Flash Flood.

Rain Bird Shrub Adaptor

Flash Flood — Tue, 11 Jul 2023 18:49:22 +0000

Rain Bird Shrub Adapter

The post Rain Bird Shrub Adaptor first appeared on Flash Flood.

Rain Bird ADJ Nozzles

Flash Flood — Tue, 11 Jul 2023 18:43:43 +0000

Features

Adjustable pattern from 0 degrees to 330 degrees
Adjustable Pattern Nozzle distributes water evenly regardless of pattern set and is compatible with other Rain Bird matched flow rate nozzles
Stainless Steel adjustment screw
Filter screen included
For use with 1800, SP40, SP25, and A17 series spray heads

Specs

18-AP Adjustable Pattern Nozzle, 0 degrees to 360 degrees, 18 ft. (4.6 m) spacing
15-AP Adjustable Pattern Nozzle, 0 degrees to 360 degrees, 15 ft. (4.6 m) spacing
12-AP Adjustable Pattern Nozzle, 0 degrees to 360 degrees, 12 ft. (3.6 m) spacing

The post Rain Bird ADJ Nozzles first appeared on Flash Flood.

Rain Bird Uni-Spray

Flash Flood — Tue, 04 Jul 2023 18:20:15 +0000

Features

Small exposed cover makes the unit virtually invisible for more attractive landscapes

Constructed of durable materials including corrosion resistant stainless steel, assuring long product life even in high pressure or surge conditions

Pressure-activated wiper seal prevents excessive flow-by and water waste and keeps debris from entering upon retraction

Two-piece ratchet mechanism allows easy nozzle pattern alignment and provides added durability

Three-year trade warranty

Specs

Pressure: 15 to 70 psi (1.0 to 4.8 bar)

Optimum pressure: 30 psi (2.1 bar)

Adjustable nozzle arc range: 0° – 360°

Flow-by: 0 at 10 psi (0.75 bar) or greater; 0.20 gpm (0.04 m³/h; 0.60 l/m) otherwise

Dimensions

Dimensions: 1/2″ (15/21) NPT female threaded inlet

Body Height: 5 7/8″ (14.9 cm)

Exposed Surface Diameter: 1 1/4″ (3.2 cm)

Model Comparison

Base Model:

N90026: 4″ pop-up height (10.2cm)

Models with High-Efficiency Nozzles Pre-Attached

A17602: 4″ pop-up height (10.2cm) with HE-VAN-10 attached

A17601: 4″ pop-up height (10.2cm) with HE-VAN-12 attached

A17600: 4″ pop-up height (10.2cm) with HE-VAN-15 attached

N19814: 4″ pop-up height (10.2cm) with HE-VAN-18 attached

The post Rain Bird Uni-Spray first appeared on Flash Flood.